在上个文章基础上改用事件组进行处理，以便实时任务。
stm32cubeMX自动生成代码
osEventFlagsId_t adctestEventHandle;
const osEventFlagsAttr_t adctestEvent_attributes = {.name = "adctestEvent"
};adctestEventHandle = osEventFlagsNew(&adctestEvent_attributes);编写代码DMA回调函数触发事件
#define ADC2_CONVERSION_COMPLETE_BIT 0x01
#define ADC3_CONVERSION_COMPLETE_BIT 0x02void HAL_ADC_ConvCpltCallback(ADC_HandleTypeDef *hadc) {if (hadc->Instance == ADC2) // 确认是ADC2的转换完成{osEventFlagsSet(adctestEventHandle, ADC2_CONVERSION_COMPLETE_BIT);HAL_ADC_Stop_DMA(&hadc2);} else if (hadc->Instance == ADC3) // 确认是ADC3的转换完成{osEventFlagsSet(adctestEventHandle, ADC3_CONVERSION_COMPLETE_BIT);HAL_ADC_Stop_DMA(&hadc3);}
}事件触发逻辑处理
void AdcTask(void *argument)
{Start_ADC2_DMA();Start_ADC3_DMA();int i = 0;uint32_t ret = 0;float voltage;for (;;) {ret = osEventFlagsWait(adctestEventHandle, ADC2_CONVERSION_COMPLETE_BIT | ADC3_CONVERSION_COMPLETE_BIT, osFlagsWaitAny, osWaitForever);if ((ret & ADC2_CONVERSION_COMPLETE_BIT) != 0){/* 打印ADC2数据 */for (i = 0; i < hadc2.Init.NbrOfConversion; i++) {voltage = adc2_values[i] * VEF / VEFVALUE;printf("ADC2[%d] = %d.%dV\r\n", i, (uint32_t) voltage,(uint32_t) (voltage * 100) % 100);}printf("\n");}if ((ret & ADC3_CONVERSION_COMPLETE_BIT) != 0){/* 打印ADC3数据 */for (i = 0; i < hadc3.Init.NbrOfConversion; i++) {voltage = adc3_values[i] * VEF / VEFVALUE;printf("ADC3[%d] = %d.%dV\r\n", i, (uint32_t) voltage,(uint32_t) (voltage * 100) % 100);}printf("\n\n");}osDelay(1);}
}
)
