DM8共享集群DSC初始化DB实例报错

问题描述

启动dmcss和dmasmsvr服务启动后，初始化DB实例提示如下报错：

[dmdba@localhost DSC0]$ /dmdb8/dmdbms/bin/dminit control=/dmdb8/dmdbms/dsc_config/DSC0/dminit.ini
initdb V8
db version: 0x7000c
file dm.key not found, use default license!
License will expire on 2024-04-17
Normal of FAST
Normal of DEFAULT
Normal of RECYCLE
Normal of KEEP
Normal of ROLLlog file path: +DMREDO/DSC0_LOG01.loglog file path: +DMREDO/DSC0_LOG02.loglog file path: +DMREDO/DSC1_LOG01.loglog file path: +DMREDO/DSC1_LOG02.log
write to dir [+DMDATA/data/DSC].
fsm_file_add group_id 1, file_id 0, size_in_pages 320000, path +DMDATA/data/ROLL.dbf failed, code -7004
Please check whether exist file or directory with the same name or view the log for more infomation, code:[-7014]
fail to init db.

问题分析

--查看初始化实例配置文件dminit.ini
[dmdba@~]# cat /dmdb8/dmdbms/dsc_config/DSC0/dminit.ini
DB_NAME                  = DSC #初始化数据库名称
SYSDBA_PWD               = SYSDBA_PWD 
SYSTEM_PATH              = +DMDATA/data  #初始化数据库存放的路径
SYSTEM                   = +DMDATA/data/SYSTEM.dbf #SYSTEM表空间路径
SYSTEM_SIZE              = 1024 #SYSTEM表空间大小
ROLL                     = +DMDATA/data/ROLL.dbf  #ROLL表空间路径
ROLL_SIZE                = 10000  #ROLL表空间大小
MAIN                     = +DMDATA/data/MAIN.dbf  #MAIN表空间路径
MAIN_SIZE                = 1024 #MAIN表空间大小
CTL_PATH                 = +DMDATA/data/dm.ctl  #DM.CTL控制文件路径
CTL_SIZE                 = 8  #DM.CTL控制文件大小
LOG_SIZE                 = 1024  #日志文件大小
DCR_PATH                 = /dev/dm/asm-dmdcr  #DCR磁盘路径
DCR_SEQNO                = 0  #连接DMASM节点节点号
AUTO_OVERWRITE           = 1   #文件存在时的处理方式
PAGE_SIZE                = 32
EXTENT_SIZE              = 16
BLANK_PAD_MODE           = 1[DSC0]  #具体节点都是以[XXX]开始，节点实例名就是XXX
CONFIG_PATH              = /dmdb8/dmdbms/dsc_config/DSC0  #配置文件存放路径
PORT_NUM                 = 5236  #节点服务器监听通讯端口号，服务器配置此参数，取值范围1024~65534，发起连接端的端口在1024~65535之间随机分配
MAL_HOST                 = 192.168.183.100 #节点MAL系统使用IP  心跳ip
MAL_PORT                 = 11246 #MAL监听端口，用于数据守护、DSC、MPP等环境中各节点实例之间MAL链路配置，监听端端口配置此参数，取值范围1024~65534，发起连接端的端口在1024~65535之间随机分配
LOG_PATH                 = +DMREDO/DSC0_LOG01.log #日志文件路径
LOG_PATH                 = +DMREDO/DSC0_LOG02.log #日志文件路径
[DSC1]  #具体节点都是以[XXX]开始，节点实例名就是XXX
CONFIG_PATH              = /dmdb8/dmdbms/dsc_config/DSC1  #配置文件存放路径
PORT_NUM                 = 5236  #节点服务器监听通讯端口号，服务器配置此参数，取值范围1024~65534，发起连接端的端口在1024~65535之间随机分配
MAL_HOST                 = 192.168.183.130  #节点MAL系统使用IP  心跳ip
MAL_PORT                 = 11246 #MAL监听端口，用于数据守护、DSC、MPP等环境中各节点实例之间MAL链路配置，监听端端口配置此参数，取值范围1024~65534，发起连接端的端口在1024~65535之间随机分配
LOG_PATH                 = +DMREDO/DSC1_LOG01.log #日志文件路径
LOG_PATH                 = +DMREDO/DSC1_LOG02.log #日志文件路径--删除初始化生成的参数文件和数据文件
db0节点删除共享磁盘中的目录
[dmdba@localhost DSC0]$ /dmdb8/dmdbms/bin/dmasmtool dcr_ini=/dmdb8/dmdbms/dsc_config/DSC0/dmdcr.ini 
ASM>ls -l
ASM>ls -l
+
disk groups total [5]......
NO.1 	 name: DMREDOid: 0au_size: 1.00 MBextent_size: 4total_size: 10.00 GBfree_size: 8.99 GBcreate_time: 2023-11-17 15:20:33modify_time: 2023-11-17 15:20:33
NO.2 	 name: DMDATAid: 1au_size: 1.00 MBextent_size: 4total_size: 10.00 GBfree_size: 9.60 GBcreate_time: 2023-11-17 15:20:56modify_time: 2023-11-17 15:20:56
NO.3 	 name: DMARCHid: 2au_size: 1.00 MBextent_size: 4total_size: 10.00 GBfree_size: 9.99 GBcreate_time: 2023-11-17 15:21:06modify_time: 2023-11-17 15:21:06
NO.4 	 name: VOTEid: 125au_size: 1.00 MBextent_size: 4total_size: 1.00 GBfree_size: 1000.00 MBcreate_time: 2023-11-17 15:10:06modify_time: 2023-11-17 15:10:41
NO.5 	 name: DCRid: 126au_size: 1.00 MBextent_size: 4total_size: 1.00 GBfree_size: 1000.00 MBcreate_time: 2023-11-17 15:09:50modify_time: 2023-11-17 15:11:41
Used time: 2.222(ms).
ASM>cd DMDATA
+DMDATA
Used time: 2.216(ms).
ASM>rm -rf *
Used time: 10.445(ms).
ASM>cd ../
Used time: 1.914(ms).
ASM>ls -ldb0节点删除初始化生成的参数文件
rm -f /dmdb8/dmdbms/dsc_config/DSC0/dmdcr.ini
rm -f /dmdb8/dmdbms/dsc_config/DSC0/sqllog.inidb1节点删除初始化生成的参数文件
rm -f /dmdb8/dmdbms/dsc_config/DSC1/dmdcr.ini
rm -f /dmdb8/dmdbms/dsc_config/DSC1/sqllog.ini--db0节点清理磁盘头
su - root
dd if=/dev/zero  of=/dev/sbe bs=1k count=1
dd if=/dev/zero  of=/dev/sbf bs=1k count=1
dd if=/dev/zero  of=/dev/sbd bs=1k count=1--db0节点重新初始化ASM磁盘
[dmdba@~]#/dmdb8/dmdbms/bin/dmasmcmd
#asm script file
#初始化 DMASM 磁盘
ASM>create asmdisk '/dev/dm/asm-dmdata' 'DATA0'
ASM>create asmdisk '/dev/dm/asm-dmredo' 'REDO0'
ASM>create asmdisk '/dev/dm/asm-dmarch' 'ARCH0'--在 db0 节点再次执行初始化 db 命令
[dmdba@~]# /dmdb8/dmdbms/bin/dminit control=/dmdb8/dmdbms/dsc_config/DSC0/dminit.ini
依旧是上面的报错。

一直掉在下面的报错坑中，在坑里呆了有小半天的时间。

Please check whether exist file or directory with the same name or view the log for more infomation, code:[-7014]

从下午3点左右一直到6点半左右，达梦厂家交流群、达梦官方在线社区平台都进行了咨询，还手动进入+DMDATA磁盘手动创建了data目录。最后求助无缘，想着扒拉下官方文档吧，逐行看一行也没敢跳过，最终发现

--过滤出参数文件中关于size大小的参数
[dmdba@localhost DSC0]$ cat /dmdb8/dmdbms/dsc_config/DSC0/dminit.ini |grep SIZE
SYSTEM_SIZE              = 1024
ROLL_SIZE                = 10000
MAIN_SIZE                = 1024
CTL_SIZE                 = 8
LOG_SIZE                 = 2048
PAGE_SIZE                = 32
EXTENT_SIZE              = 16--查看ASM磁盘大小
[dmdba@localhost DSC0]$ /dmdb8/dmdbms/bin/dmasmcmd
DMASMCMD V8
ASM>listdisks /dev/dm
[/dev/dm/asm-dmvote]: Used ASM disk, name:[DMASMvote], size:[1024M], group_id:[125], disk_id:[0]
[/dev/dm/asm-dmdcr]: Used ASM disk, name:[DMASMdcr], size:[1024M], group_id:[126], disk_id:[0]
[/dev/dm/asm-dmdata]: Unused ASM disk, name:[DMASMDATA0], size:[10239M]
[/dev/dm/asm-dmarch]: Unused ASM disk, name:[DMASMARCH0], size:[10239M]
[/dev/dm/asm-dmredo]: Unused ASM disk, name:[DMASMREDO0], size:[10239M]
Used time: 4.025(ms).

/dmdb8/dmdbms/dsc_config/DSC0/dminit.ini 数据文件的总大小超过了磁盘最大空间，因此初始化失败。

解决办法

将文件类的参数统一改成128重新初始化

--查看更改后的参数
[dmdba@localhost DSC0]$ cat /dmdb8/dmdbms/dsc_config/DSC0/dminit.ini |grep SIZE
SYSTEM_SIZE              = 128
ROLL_SIZE                = 128
MAIN_SIZE                = 128
CTL_SIZE                 = 8
LOG_SIZE                 = 128
PAGE_SIZE                = 32
EXTENT_SIZE              = 16--再次初始化
[dmdba@localhost DSC0]$ /dmdb8/dmdbms/bin/dminit control=/dmdb8/dmdbms/dsc_config/DSC0/dminit.ini
initdb V8
db version: 0x7000c
file dm.key not found, use default license!
License will expire on 2024-04-17
value of the log file size error.the log file size is between 256 and 8192.
Read ini file(/dmdb8/dmdbms/dsc_config/DSC0/dminit.ini) error in line 12, code(-1)
fail to init db.

LOG_SIZE取值范围256 and 8192单位M
将LOG_SIZE更改为256重新初始化成功

[dmdba@localhost DSC0]$ /dmdb8/dmdbms/bin/dminit control=/dmdb8/dmdbms/dsc_config/DSC0/dminit.ini
initdb V8
db version: 0x7000c
file dm.key not found, use default license!
License will expire on 2024-04-17
Normal of FAST
Normal of DEFAULT
Normal of RECYCLE
Normal of KEEP
Normal of ROLLlog file path: +DMREDO/DSC0_LOG01.loglog file path: +DMREDO/DSC0_LOG02.loglog file path: +DMREDO/DSC1_LOG01.loglog file path: +DMREDO/DSC1_LOG02.logFILE "/dmdb8/dmdbms/dsc_config/DSC0/dm.ini" has already existed
FILE "/dmdb8/dmdbms/dsc_config/DSC0/sqllog.ini" has already existed
FILE "/dmdb8/dmdbms/dsc_config/DSC1/dm.ini" has already existed
FILE "/dmdb8/dmdbms/dsc_config/DSC1/sqllog.ini" has already existed
write to dir [+DMDATA/data/DSC].
create dm database success. 2023-11-17 18:49:14