一 版本升级
1.1 查看空间 如果不足 delete /unreserved 删除无用文件
dir
1.2 上传版本文件到设备
<H3C>copy usba3:/S5130SHIG-CMW710-R8307P10.ipe flash:/
Copy usba3:/SPDB-IOS/S5130SHIG-CMW710-R8307P10.ipe to flash:/S5130SHIG-CMW710-R8307P10.ipe? [Y/N]:y
Copying file usba3:/S5130SHIG-CMW710-R8307P10.ipe to flash:/S5130SHIG-CMW710-R8307P10.ipe.............. Done.
<H3C>
1.3 设置下次启动文件
<H3C>boot-loader file flash:/S5130SHIG-CMW710-R8307P10.ipe all main
Verifying the file flash:/S5130SHIG-CMW710-R8307P10.ipe on slot 1...Done.
H3C S5130S-54S-HI-G images in IPE:s5130shig-cmw710-boot-r8307p10.bins5130shig-cmw710-system-r8307p10.bins5130shig-cmw710-freeradius-r8307p10.bin
This command will set the main startup software images. Continue? [Y/N]:y
Add images to slot 1.
Decompressing file s5130shig-cmw710-boot-r8307p10.bin to flash:/s5130shig-cmw710-boot-r8307p10.bin...Done.
Decompressing file s5130shig-cmw710-system-r8307p10.bin to flash:/s5130shig-cmw710-system-r8307p10.bin...Done.
Decompressing file s5130shig-cmw710-freeradius-r8307p10.bin to flash:/s5130shig-cmw710-freeradius-r8307p10.bin...Done.
Verifying the file flash:/s5130shig-cmw710-boot-r8307p10.bin on slot 1...Done.
Verifying the file flash:/s5130shig-cmw710-system-r8307p10.bin on slot 1...Done.
Verifying the file flash:/s5130shig-cmw710-freeradius-r8307p10.bin on slot 1...Done.
The images that have passed all examinations will be used as the main startup software images at the next reboot on slot 1.
Decompression completed.
Do you want to delete flash:/S5130SHIG-CMW710-R8307P10.ipe now? [Y/N]:n
<H3C>
1.4 检查下次启动文件
<H3C>dis boot
Software images on slot 1:
Current software images:flash:/s5130shig-cmw710-boot-r8307p60.binflash:/s5130shig-cmw710-system-r8307p60.binflash:/s5130shig-cmw710-freeradius-r8307p60.bin
Main startup software images:flash:/s5130shig-cmw710-boot-r8307p10.binflash:/s5130shig-cmw710-system-r8307p10.binflash:/s5130shig-cmw710-freeradius-r8307p10.bin
Backup startup software images:None
<H3C>
1.5 重启设备
<H3C>reboot
Start to check configuration with next startup configuration file, please wait.........DONE!
Current configuration may be lost after the reboot, save current configuration? [Y/N]:n
This command will reboot the device. Continue? [Y/N]:y
Now rebooting, please wait....%Jan 1 00:04:15:021 2011 H3C DEV/5/SYSTEM_REBOOT: System is rebooting now.
..Automatic configuration is running, press CTRL_C or CTRL_D to break.
Automatic configuration is aborted.
二 补丁升级
2.1 逐一激活Master和Standby上的补丁包
<H3C>install activate patch flash:/s5130shig-cmw710-system-patch-r8307p10hs11.bin all
This Command will activate the patch for the following slots:
slot 1
[Y/N]:y
Verifying the file flash:/s5130shig-cmw710-system-patch-r8307p10hs11.bin on slot 1...Done.
This operation might take several minutes, please wait....................................................................................................................................................................................................................................................................................%Jan 1 10:44:21:756 2011 H3C PKG/5/PKG_UPGRADE_INFO: The H3C S5130S-54S-HI-G device upgraded the software version from Release 8307P10 to Release 8307P10-R8307P10HS11
.Done.
<H3C>
2.2 确认补丁包更改，以保证补丁包在设备下次重启后仍然有效。
<H3C>install commit
%Jan 1 10:44:22:554 2011 H3C PKG/5/PKG_INSTALL_ACTIVATE_SUCCESS: -IPAddr=**-User=**: Executed the install activate command successfully
This operation will take several minutes, please wait....Done.
The current software images have been saved as the startup software images.
Current software images on slot 1:flash:/s5130shig-cmw710-boot-r8307p10.binflash:/s5130shig-cmw710-system-r8307p10.binflash:/s5130shig-cmw710-freeradius-r8307p10.binflash:/s5130shig-cmw710-system-patch-r8307p10hs11.bin
<H3C>
2.3 查看已确认更改的软件包（此时可看到补丁包已确认更改）。
<H3C>display install active
Active packages on slot 1:flash:/s5130shig-cmw710-boot-r8307p10.binflash:/s5130shig-cmw710-system-r8307p10.binflash:/s5130shig-cmw710-freeradius-r8307p10.binflash:/s5130shig-cmw710-system-patch-r8307p10hs11.bin
<H3C>
2.3 保存并重启设备。对于需要重启激活的，进行重启。热补丁保存即可。
save force
reboot
y
y
