platformio上ESP32-s3,N16R8选择板子的解决方案

1.首先选择esp32-s3-devkitc-1（8MB QD,NoFLASH）

2.在创建好的项目下，找到platformio.ini，修改代码为：

[env:esp32-s3-devkitc-1]
platform = espressif32
board = esp32-s3-devkitc-1
framework = arduino
; 指定为16MB的FLASH分区表
board_build.arduino.partitions = default_16MB.csv
; 指定FLASH和PSRAM的运行模式
board_build.arduino.memory_type = qio_opi
; 预定义宏，启用PSRAM
build_flags = -DBOARD_HAS_PSRAM
; 指定FLASH容量为16MB
board_upload.flash_size = 16MB

3.同样在项目中找到src，打开找到main.cpp 写入setup()中的4行代码，编译后上传到esp32

#include <Arduino.h>// put function declarations here:
int myFunction(int, int);void setup() {Serial.begin(115200);Serial.printf("Deafult free size: %d\n", heap_caps_get_free_size(MALLOC_CAP_DEFAULT));Serial.printf("PSRAM free size: %d\n", heap_caps_get_free_size(MALLOC_CAP_SPIRAM));Serial.printf("Flash size: %d bytes\n", ESP.getFlashChipSize());
}void loop() {// put your main code here, to run repeatedly:
}// put function definitions here:
int myFunction(int x, int y) {return x + y;
}

4.烧录成功后，打开串口助手，按下rest 复位键，串口输出值如下。