网站怎么做直播,小制作简单手工,网络推广 网站制作,哈尔滨网页设计招聘基本思想#xff1a;需要使用linux系统调用alliedvisio工业相机完成业务#xff0c;这里只做驱动相机调用#xff0c;具体不涉及业务开发 Alvium 相机选型 - Allied Vision 一、先用软件调用一下用于机器视觉和嵌入式视觉的Vimba X 软件开发包 - Allied Vision VimbaX_Set…基本思想需要使用linux系统调用alliedvisio工业相机完成业务这里只做驱动相机调用具体不涉及业务开发 Alvium 相机选型 - Allied Vision 一、先用软件调用一下用于机器视觉和嵌入式视觉的Vimba X 软件开发包 - Allied Vision VimbaX_Setup-2023-4-Linux64.tar.gz,然后参考用户手册配置 ubuntuubuntu:~/Downloads/VimbaX_Setup-2023-4-Linux64/VimbaX_2023-4/cti$ sudo ./VimbaGigETL_Install.sh Registering GENICAM_GENTL64_PATH Done Please log off once before using the GigE transport layer ubuntuubuntu:~/Downloads/VimbaX_Setup-2023-4-Linux64/VimbaX_2023-4/cti$ sudo ./VimbaUSBTL_Install.sh Registering GENICAM_GENTL64_PATH Registering AVTUSBTL device types Done Please reboot before using the USB transport layer二、关机重启之后使用非超级权限启动viewer ubuntuubuntu:~/Downloads/VimbaX_Setup-2023-4-Linux64/VimbaX_2023-4/bin$ ./VimbaXViewer 三、使用python代码调用该相机 ubuntuubuntu:~/Downloads/VimbaX_Setup-2023-4-Linux64/VimbaX_2023-4/api/python$ pip3 install vmbpy-1.0.4-py3-none-any.whl Processing ./vmbpy-1.0.4-py3-none-any.whl Installing collected packages: vmbpy Successfully installed vmbpy-1.0.4测试相机使用官方的demo ubuntuubuntu:~$ git clone https://github.com/alliedvision/VmbPy.git Cloning into VmbPy... remote: Enumerating objects: 4891, done. remote: Counting objects: 100% (4891/4891), done. remote: Compressing objects: 100% (1267/1267), done. remote: Total 4891 (delta 3670), reused 4837 (delta 3616), pack-reused 0 Receiving objects: 100% (4891/4891), 932.50 KiB | 616.00 KiB/s, done. Resolving deltas: 100% (3670/3670), done. ubuntuubuntu:~$ cd VmbPy/Examples/ ubuntuubuntu:~/VmbPy/Examples$ ls action_commands.py event_handling.py multithreading_opencv.py asynchronous_grab_opencv.py list_cameras.py synchronous_grab.py asynchronous_grab.py list_chunk_data.py user_set.py convert_pixel_format.py list_features.py create_trace_log.py load_save_settings.py ubuntuubuntu:~/VmbPy/Examples$ python3 asynchronous_grab_opencv.py /// /// VmbPy Asynchronous Grab with OpenCV Example /// ///测试相机可以正常打开 四、ubuntu上使用c调用调用官方的c等着研究剔除无用的代码