固件：Official USA Firmware:

USA BIN Firmware 5.8.050S_1028:

//mega.nz/#F!7PhyDI6D!TnwNlMmWXosK1uCUdpyNGg[/url]

USA ZIP Firmware 5.8.056S_0420 (OTA ZIP, must be flashed only after flashing the above bin):

//drive.google.com/open?id=1N9...rNHVB_-VPIadnw[/url]

Official INDIA Firmware:

INDIA BIN Firmware 5.8.049S_0906:

//mega.nz/#F!CaAQFCjI!5l6HqL2H756890q3FKy7Pw[/url]

INDIA ZIP Firmware 5.9.057S_0604(OTA ZIP, must be flashed only after flashing the above bin):

//mega.nz/#F!WXYBRJYQ!LcFLkVNZD0o4Fi2eacX3iQ[/url]

下载地址：Official USA Firmware(zip)：//drive.google.com/file/d/1N96FWEseGxOToqwks3rNHVB_-VPIadnw/view[/url]

zip包安装说明：Flash ZIP firmware:

1. Since mostly this is not a full firmware, It is recommended to have a full BIN firmware flashed for the region you are flashing the ZIP firmware for.

2. Turn off the TV

3. Rename the file as Update.Zip and put it in the root of the flash drive (fat32). Insert the USB flash drive into the TV (Normally into the top slot, if it does not work in the other)

4. Point the remote tothe TV and press Buttons in exact Sequence: SETTINGS, VOL +, VOL-, CH +, CH-, POWER. Press slowly, hold each button for 1-2 sec.

5. The TV would turn on and the firmware flashing would start.

6. Alternately (Instead of steps 4-5), you may also use the offline update option from the System Update app already there in TV.

7. Make sure the power is not turned off during flashing process as this may brick your TV.