新中新身份证阅读器驱动下载sdk DKQ-A16D

读取操作

int nRet;string sMsg = "";IDCardData idcardData = new IDCardData();byte[] ctmp = new byte[255];ReadCardAPI.Syn_SetPhotoPath(1, ref ctmp);setupDataFormate(1);nRet = ReadCardAPI.Syn_OpenPort(Main_Form.m_iPort);if (nRet == 0){DateTime startTime = DateTime.Now;nRet = ReadCardAPI.Syn_ReadMsg(Main_Form.m_iPort, 0, ref idcardData);int dTime = (int)(DateTime.Now - startTime).TotalMilliseconds;if (Main_Form.m_iReadStart == 1){Main_Form.m_iReadSum++;}if (nRet == 0 || nRet == 1)     //0读取身份证信息成功，1读取身份证信息成功，解码照片不成功，其他.读取身份证信息失败{if (Main_Form.m_iReadStart == 1){Main_Form.m_iReadOKSum++;}ShowIDcardInfo(idcardData);sMsg = "读取身份证信息成功，" + dTime + "ms";mainForm.listBox_log.Items.Insert(0, DateTime.Now.ToString() + "\t" + sMsg);}else{sMsg = "读取身份证信息错误，" + dTime + "ms";mainForm.listBox_log.Items.Insert(0, DateTime.Now.ToString() + "\t" + sMsg);}if (Main_Form.m_iReadStart == 1){sMsg = "第" + Main_Form.m_iReadSum + "次读二代证";mainForm.listBox_log.Items.Insert(0, DateTime.Now.ToString() + "\t" + sMsg);}}else{sMsg = "打开端口错误";mainForm.listBox_log.Items.Insert(0, DateTime.Now.ToString() + "\t" + sMsg);}if (Main_Form.m_iPort > 0){ReadCardAPI.Syn_ClosePort(Main_Form.m_iPort);}

解析二代证

/// <summary>/// 显示读取到的身份证的信息/// </summary>/// <param name="idcardData"></param>private void ShowIDcardInfo(IDCardData idcardData){string sMsg = "";sMsg = "照片路径：" + idcardData.PhotoFileName;mainForm.listBox_log.Items.Insert(0, DateTime.Now.ToString() + "\t" + sMsg);if (idcardData.CardType[0] == 'J')//港澳台通行证{sMsg=("签发次数:"+ idcardData.IssuesTimes);mainForm.listBox_log.Items.Insert(0, DateTime.Now.ToString() + "\t" + (sMsg));sMsg="通行证号码:"+ idcardData.PassID;mainForm.listBox_log.Items.Insert(0, DateTime.Now.ToString() + "\t" + (sMsg));}sMsg = "有效期结束：" + idcardData.UserLifeEnd;mainForm.listBox_log.Items.Insert(0, DateTime.Now.ToString() + "\t" + sMsg);sMsg = "有效期开始：" + idcardData.UserLifeBegin;mainForm.listBox_log.Items.Insert(0, DateTime.Now.ToString() + "\t" + sMsg);sMsg = "发证机关：" + idcardData.GrantDept;mainForm.listBox_log.Items.Insert(0, DateTime.Now.ToString() + "\t" + sMsg);sMsg = "身份证号：" + idcardData.IDCardNo;mainForm.listBox_log.Items.Insert(0, DateTime.Now.ToString() + "\t" + sMsg);sMsg = "住址：" + idcardData.Address;mainForm.listBox_log.Items.Insert(0, DateTime.Now.ToString() + "\t" + sMsg);sMsg = "出生：" + idcardData.Born;mainForm.listBox_log.Items.Insert(0, DateTime.Now.ToString() + "\t" + sMsg);sMsg = "民族：" + idcardData.Nation;mainForm.listBox_log.Items.Insert(0, DateTime.Now.ToString() + "\t" + sMsg);sMsg = "性别：" + idcardData.Sex;mainForm.listBox_log.Items.Insert(0, DateTime.Now.ToString() + "\t" + sMsg);if (idcardData.CardType == "I"){//外国人居住证sMsg = "证件版本：" + idcardData.CertVol;mainForm.listBox_log.Items.Insert(0, DateTime.Now.ToString() + "\t" + sMsg);sMsg = "英文姓名：" + idcardData.EngName;mainForm.listBox_log.Items.Insert(0, DateTime.Now.ToString() + "\t" + sMsg);}sMsg = "姓名：" + idcardData.Name;mainForm.listBox_log.Items.Insert(0, DateTime.Now.ToString() + "\t" + sMsg);if (idcardData.CardType[0] == 'I'){sMsg="证件类型：外国人永久居住证";mainForm.listBox_log.Items.Insert(0, DateTime.Now.ToString() + "\t" + sMsg);}else if (idcardData.CardType[0] == 'J'){sMsg="证件类型：港澳台居民居住证";mainForm.listBox_log.Items.Insert(0, DateTime.Now.ToString() + "\t" + (sMsg));}else{sMsg="证件类型：居民身份证";mainForm.listBox_log.Items.Insert(0, DateTime.Now.ToString() + "\t" + (sMsg));}//这样做可以及时释放文件占用，否则第二次刷卡会报错Image tmp = Image.FromFile(idcardData.PhotoFileName);Bitmap img = new Bitmap(tmp);tmp.Dispose();mainForm.pictureBox_img.Image = img;}

封装读卡类

using System;
using System.Collections.Generic;
using System.Runtime.InteropServices;
using System.Text;namespace SynjonesReader
{public static class ReadCardAPI{////				SAM端口函数/////// <summary>/// 查看串口当前波特率(该函数只用于SAM采用RS232串口的情形，如果采用USB接口则不支持该API)/// </summary>/// <param name="iPort">[in] 整数，表示端口号。此处端口号必须为1-16，表示串口</param>/// <param name="puiBaudRate">[out] 无符号整数指针，指向普通串口当前波特率, 默认情况下为115200</param>/// <returns>0成功，1失败/不合法，5无法获得该SAM的波特率，该SAM串口不可用</returns>[DllImport("SynIDCardAPI.dll", CharSet = CharSet.Unicode, CallingConvention = CallingConvention.StdCall, EntryPoint = "Syn_GetCOMBaud")]public static extern int Syn_GetCOMBaud(int iPort, ref int puiBaudRate);/// <summary>/// 设置SAM的串口的波特率(该函数只用于SAM采用RS232串口的情形，如果采用USB接口则不支持该API)，/// 设置成功后，在该SAM和主机注册表中都记录设置后的波特率，保证在SAM重新启动和该套API被重新调用时采用设置后的波特率。/// 该函数调用成功后，需要延时5毫秒，然后才能继续与SAM通信/// </summary>/// <param name="iPort">[in] 整数，表示端口号。此处端口号必须为1-16，表示串口。</param>/// <param name="uiCurrBaud">/// [in] 无符号整数，调用该API前已设置的业务终端与SAM通信的波特率(SAM出厂时默认,业务终端与SAM通信的波特率为115200)./// 业务终端以该波特率与SAM通信,发出设置SAM新波特率的命令.。/// uiCurrBaud只能为下列数值之一：115200，57600，38400，19200，9600.如果uiCurrBaud数值不是这些值之一，函数返回0X21;/// 如果已设置的波特率与uiCurrBaud不一致, 则函数返回0X02,表示不能设置,调用API不成功。/// </param>/// <param name="uiSetBaud">/// [in] 无符号整数，将要设置的SAM与业务终端通信波特率。/// uiSetBaud只能取下列值之一:：115200，57600，38400，19200，9600，/// 如果输入uiSetBaud参数不是这些数值之一,，函数返回0X21,设置不成功,保持原来的波特率不变。/// </param>/// <returns>/// 0成功，1端口打开失败/端口号不合法，2超时，设置不成功，33 uiCurrBaud 、uiSetBaud输入参数数值错误/// </returns>[DllImport("SynIDCardAPI.dll", CharSet = CharSet.Unicode, CallingConvention = CallingConvention.StdCall, EntryPoint = "Syn_SetCOMBaud")]public static extern int Syn_SetCOMBaud(int iPort, int uiCurrBaud, int uiSetBaud);/// <summary>/// 打开端口/// </summary>/// <param name="iPort">端口号。1-16（十进制）为串口，1001-1016（十进制）为USB口，9999为USBHID</param>/// <returns>0成功，1打开端口失败/端口号不合法</returns>[DllImport("SynIDCardAPI.dll", CharSet = CharSet.Unicode, CallingConvention = CallingConvention.StdCall, EntryPoint = "Syn_OpenPort")]public static extern int Syn_OpenPort(int iPort);/// <summary>/// 关闭端口/// </summary>/// <param name="iPort">[in]整数，表示端口号</param>/// <returns>0成功，1端口不合法</returns>[DllImport("SynIDCardAPI.dll", CharSet = CharSet.Unicode, CallingConvention = CallingConvention.StdCall, EntryPoint = "Syn_ClosePort")]public static extern int Syn_ClosePort(int iPort);////				SAM类函数////[DllImport("SynIDCardAPI.dll", CharSet = CharSet.Unicode, CallingConvention = CallingConvention.StdCall, EntryPoint = "Syn_SetMaxRFByte")]public static extern int Syn_SetMaxRFByte(int iPort,byte ucByte, int bIfOpen);/// <summary>/// 对SAM复位/// </summary>/// <param name="iPort">/// [in] 整数，表示端口号。/// 根据SAM使用的接口不同(分为普通串口SAM和USB口SAM)，/// 分别使用不同的端口号（目前串口和USB都只支持16个，即串口0001-0016和USB1001-1016）/// </param>/// <param name="iIfOpen">/// [in] 整数，0表示不在该函数内部打开和关闭串口，/// 此时确保之前调用了Syn_OpenPort来打开端口，并且在不需要与端口通信时，调用Syn_ClosePort关闭端口；/// 非0表示在API函数内部包含了打开端口和关闭端口函数，之前不需要调用Syn_OpenPort，也不用再调用Syn_ClosePort/// </param>/// <returns>0成功，其他失败（具体参见返回码表）</returns>[DllImport("SynIDCardAPI.dll", CharSet = CharSet.Unicode, CallingConvention = CallingConvention.StdCall, EntryPoint = "Syn_ResetSAM")]public static extern int Syn_ResetSAM(int iPort, int iIfOpen);/// <summary>/// 对SAM进行状态检测/// </summary>/// <param name="iPort">[in] 整数，表示端口号。参见Syn_ResetSAM</param>/// <param name="iIfOpen">[in] 整数，参见Syn_ResetSAM</param>/// <returns>0SAM正常,96自检失败，不能接收命令，其他，命令失败</returns>[DllImport("SynIDCardAPI.dll", CharSet = CharSet.Unicode, CallingConvention = CallingConvention.StdCall, EntryPoint = "Syn_GetSAMStatus")]public static extern int Syn_GetSAMStatus(int iPort, int iIfOpen);/// <summary>/// 读取SAM的编号/// </summary>/// <param name="iPort">[in] 整数，表示端口号。参见Syn_ResetSAM</param>/// <param name="pucSAMID">[out] 无符号字符串指针，指向读到的SAM编号， 16字节</param>/// <param name="iIfOpen"></param>/// <returns>0成功，其他，失败</returns>[DllImport("SynIDCardAPI.dll", CharSet = CharSet.Unicode, CallingConvention = CallingConvention.StdCall, EntryPoint = "Syn_GetSAMID")]public static extern int Syn_GetSAMID(int iPort, byte[] pucSAMID, int iIfOpen);[DllImport("SynIDCardAPI.dll", CharSet = CharSet.Unicode, CallingConvention = CallingConvention.StdCall, EntryPoint = "Syn_GetSAMIDToStr")]public static extern int Syn_GetSAMIDToStr(int iPort, ref char[] pucSAMID, int iIfOpen);////				身份证卡类函数/////// <summary>/// 开始寻卡/// </summary>/// <param name="iPort">[in] 整数，表示端口号。参见Syn_ResetSAM</param>/// <param name="pucIIN">[out] 无符号字符指针，指向读到的IIN</param>/// <param name="iIfOpen">[in] 整数，参见Syn_ResetSAM</param>/// <returns>0成功，128失败</returns>[DllImport("SynIDCardAPI.dll", CharSet = CharSet.Unicode, CallingConvention = CallingConvention.StdCall, EntryPoint = "Syn_StartFindIDCard")]public static extern int Syn_StartFindIDCard(int iPort, ref byte[] pucIIN, int iIfOpen);/// <summary>/// 选卡/// </summary>/// <param name="iPort">[in] 整数，表示端口号。参见Syn_ResetSAM</param>/// <param name="pucIIN">[out] 无符号字符指针，指向读到的SN</param>/// <param name="iIfOpen">[in] 整数，参见Syn_ResetSAM</param>/// <returns>0选卡成功，129选卡失败</returns>[DllImport("SynIDCardAPI.dll", CharSet = CharSet.Unicode, CallingConvention = CallingConvention.StdCall, EntryPoint = "Syn_SelectIDCard")]public static extern int Syn_SelectIDCard(int iPort, ref byte[] pucIIN, int iIfOpen);[DllImport("SynIDCardAPI.dll", CharSet = CharSet.Unicode, CallingConvention = CallingConvention.StdCall, EntryPoint = "Syn_ReadBaseMsg")]public static extern int Syn_ReadBaseMsg(int iPort, ref byte pucCHMsg, ref int puiCHMsgLen,ref byte pucPHMsg,ref int puiPHMsgLen, int iIfOpen);[DllImport("SynIDCardAPI.dll", CharSet = CharSet.Unicode, CallingConvention = CallingConvention.StdCall, EntryPoint = "Syn_ReadBaseMsgToFile")]public static extern int Syn_ReadBaseMsgToFile(int iPort, ref char[] pcCHMsgFileName, ref int puiCHMsgLen, ref char[] pcPHMsgFileName, ref int puiPHMsgLen, int iIfOpen);[DllImport("SynIDCardAPI.dll", CharSet = CharSet.Unicode, CallingConvention = CallingConvention.StdCall, EntryPoint = "Syn_ReadBaseFPMsg")]public static extern int Syn_ReadBaseFPMsg(int iPort, ref byte pucCHMsg, ref int puiCHMsgLen, ref byte pucPHMsg, ref int puiPHMsgLen, ref byte pucFPMsg, ref int puiFPMsgLen, int iIfOpen);[DllImport("SynIDCardAPI.dll", CharSet = CharSet.Unicode, CallingConvention = CallingConvention.StdCall, EntryPoint = "Syn_ReadBaseFPMsgToFile")]public static extern int Syn_ReadBaseFPMsgToFile(int iPort, ref char[] pcCHMsgFileName, ref int puiCHMsgFileLen, ref char[] pcPHMsgFileName, ref int puiPHMsgFileLen, ref char[] pcFPMsgFileName, ref int puiFPMsgFileLen, int iIfOpen);[DllImport("SynIDCardAPI.dll", CharSet = CharSet.Unicode, CallingConvention = CallingConvention.StdCall, EntryPoint = "Syn_ReadNewAppMsg")]public static extern int Syn_ReadNewAppMsg(int iPort, ref byte pucAppMsg, ref int puiAppMsgLen, int iIfOpen);[DllImport("SynIDCardAPI.dll", CharSet = CharSet.Unicode, CallingConvention = CallingConvention.StdCall, EntryPoint = "Syn_GetBmp")]public static extern int Syn_GetBmp(int iPort, ref char[] Wlt_File);/// <summary>/// 读取身份证中的基本信息和照片信息，并按设置转化信息和照片/// </summary>/// <param name="iPort">[in] 整数，表示端口号。参见Syn_ResetSAM</param>/// <param name="iIfOpen">[in] 整数，参见Syn_ResetSAM</param>/// <param name="pIDCardData">[out] IDCardData信息</param>/// <returns>0读取身份证信息成功，1读取身份证信息成功，解码照片不成功，其他.读取身份证信息失败</returns>[DllImport("SynIDCardAPI.dll", CharSet = CharSet.Unicode, CallingConvention = CallingConvention.StdCall, EntryPoint = "Syn_ReadMsg")]public static extern int Syn_ReadMsg(int iPort, int iIfOpen, ref IDCardData pIDCardData);/// <summary>/// 读取身份证中的基本信息和照片信息，并按设置转化信息和照片/// </summary>/// <param name="iPort">[in] 整数，表示端口号。参见Syn_ResetSAM</param>/// <param name="iIfOpen">[in] 整数，参见Syn_ResetSAM</param>/// <param name="pIDCardData">[out] IDCardData信息</param>/// <param name="cFPhotoname">cFPhotoName返回指纹信息文件名</param>/// <returns>0读取身份证信息成功，无指纹信息，1读取身份证信息成功，指纹读取成功，其他.读取身份证信息失败</returns>[DllImport("SynIDCardAPI.dll", CharSet = CharSet.Unicode, CallingConvention = CallingConvention.StdCall, EntryPoint = "Syn_ReadFPMsg")]public static extern int Syn_ReadFPMsg(int iPort, int iIfOpen, ref IDCardData pIDCardData, byte[] cFPhotoname);/// <summary>/// 自动寻找读卡器/// </summary>/// <returns>0失败，大于0为串口号或者端口号</returns>[DllImport("SynIDCardAPI.dll", CharSet = CharSet.Unicode, CallingConvention = CallingConvention.StdCall, EntryPoint = "Syn_FindReader")]public static extern int Syn_FindReader();[DllImport("SynIDCardAPI.dll", CharSet = CharSet.Unicode, CallingConvention = CallingConvention.StdCall, EntryPoint = "Syn_FindUSBReader")]public static extern int Syn_FindUSBReader();[DllImport("SynIDCardAPI.dll", CharSet = CharSet.Unicode, CallingConvention = CallingConvention.StdCall, EntryPoint = "Syn_BmpToJpeg")]public static extern int Syn_BmpToJpeg(ref char[] cBmpName, ref char[] cJpegName);[DllImport("SynIDCardAPI.dll", CharSet = CharSet.Unicode, CallingConvention = CallingConvention.StdCall, EntryPoint = "Syn_PhotoToStrBase64")]public static extern int Syn_PhotoToStrBase64(ref char[] cBase64, ref int iLen, ref char[] cPhotoName);[DllImport("SynIDCardAPI.dll", CharSet = CharSet.Unicode, CallingConvention = CallingConvention.StdCall, EntryPoint = "Syn_StrBase64ToPhoto")]public static extern int Syn_StrBase64ToPhoto(ref char[] cBase64, int iLen, ref char[] cPhotoName);////				设置附加功能函数/////// <summary>/// 设置照片文件存储的路径/// </summary>/// <param name="iOption">[in] 整形，0=C:根目录，	1=当前路径	，2=指定路径</param>/// <param name="cPhotoPath">[in] 字符指针。路径名</param>/// <returns></returns>[DllImport("SynIDCardAPI.dll", CharSet = CharSet.Unicode, CallingConvention = CallingConvention.StdCall, EntryPoint = "Syn_SetPhotoPath")]public static extern int Syn_SetPhotoPath(int iOption, ref byte[] cPhotoPath);[DllImport("SynIDCardAPI.dll", CharSet = CharSet.Unicode, CallingConvention = CallingConvention.StdCall, EntryPoint = "Syn_SetPhotoType")]public static extern int Syn_SetPhotoType(int iType);/// <summary>/// 设置照片文件的文件名/// </summary>/// <param name="iType">[in]整形。0=tmp，1=姓名，2=身份证号，3=姓名_身份证号</param>/// <returns>0成功，-1失败</returns>[DllImport("SynIDCardAPI.dll", CharSet = CharSet.Unicode, CallingConvention = CallingConvention.StdCall, EntryPoint = "Syn_SetPhotoName")]public static extern int Syn_SetPhotoName(int iType);[DllImport("SynIDCardAPI.dll", CharSet = CharSet.Unicode, CallingConvention = CallingConvention.StdCall, EntryPoint = "Syn_SetPhotoNameEx")]public static extern int Syn_SetPhotoNameEx(int iType, ref char[] cPhotoname);/// <summary>/// 设置返回性别的格式/// </summary>/// <param name="iType">[in] 整形。0=卡内存储的数据， 1=解释之后的数据</param>/// <returns>0成功，-1失败</returns>[DllImport("SynIDCardAPI.dll", CharSet = CharSet.Unicode, CallingConvention = CallingConvention.StdCall, EntryPoint = "Syn_SetSexType")]public static extern int Syn_SetSexType(int iType);/// <summary>/// 设置返回民族的格式/// </summary>/// <param name="iType">[in]整形。0=卡内存储的数据，1=解释之后的数据，2=解释之后+“族”</param>/// <returns>0成功，-1失败</returns>[DllImport("SynIDCardAPI.dll", CharSet = CharSet.Unicode, CallingConvention = CallingConvention.StdCall, EntryPoint = "Syn_SetNationType")]public static extern int Syn_SetNationType(int iType);/// <summary>/// 设置返回出生日期的格式/// </summary>/// <param name="iType">in] 整形。0=YYYYMMDD,1=YYYY年MM月DD日,2=YYYY.MM.DD,3=YYYY-MM-DD,4=YYYY/MM/DD</param>/// <returns>0成功，-1失败</returns>[DllImport("SynIDCardAPI.dll", CharSet = CharSet.Unicode, CallingConvention = CallingConvention.StdCall, EntryPoint = "Syn_SetBornType")]public static extern int Syn_SetBornType(int iType);/// <summary>/// 设置返回有效期开始日期的格式/// </summary>/// <param name="iType">[in] 整形。0=YYYYMMDD,1=YYYY年MM月DD日,2=YYYY.MM.DD,3=YYYY-MM-DD,4=YYYY/MM/DD</param>/// <returns>0成功，-1失败</returns>[DllImport("SynIDCardAPI.dll", CharSet = CharSet.Unicode, CallingConvention = CallingConvention.StdCall, EntryPoint = "Syn_SetUserLifeBType")]public static extern int Syn_SetUserLifeBType(int iType);/// <summary>/// 设置返回有效期结束日期的格式/// </summary>/// <param name="iType">[in] 整形。0=YYYYMMDD,1=YYYY年MM月DD日,2=YYYY.MM.DD,3=YYYY-MM-DD,4=YYYY/MM/DD</param>/// <param name="iOption">[in] 整形。0=长期不转换   1=长期转换为 有效期开始加50年</param>/// <returns>0成功，-1失败</returns>[DllImport("SynIDCardAPI.dll", CharSet = CharSet.Unicode, CallingConvention = CallingConvention.StdCall, EntryPoint = "Syn_SetUserLifeEType")]public static extern int Syn_SetUserLifeEType(int iType, int iOption);////				USBHID函数/////// <summary>/// 复位M1卡片，返回M1卡片的卡号和卡类型/// </summary>/// <param name="iPort">[in]整形，读卡器的端口号，可以使用Syn_FindReader获得</param>/// <param name="pdwCardSN">[out]无符号四字节，返回M1卡片卡号</param>/// <param name="pbSize">[out] 无符号字节数组，返回M1卡卡类型</param>/// <returns>0成功，其他失败</returns>[DllImport("SynIDCardAPI.dll", CharSet = CharSet.Unicode, CallingConvention = CallingConvention.StdCall, EntryPoint = "Syn_USBHIDM1Reset")]public static extern int Syn_USBHIDM1Reset(int iPort, ref UInt32 pdwCardSN, ref byte pbSize);/// <summary>/// 用密钥验证M1卡/// </summary>/// <param name="iPort">[in]整形，读卡器的端口号，可以使用Syn_FindReader获得</param>/// <param name="KeyType">[in]无符号字节，验证类型，0—密钥A验证 1—密钥B验证</param>/// <param name="BlockNo">[in]无符号字节，M1卡块号</param>/// <param name="pKey">[in]无符号字节数组，6字节，密钥数组</param>/// <returns>0成功，128失败</returns>[DllImport("SynIDCardAPI.dll", CharSet = CharSet.Unicode, CallingConvention = CallingConvention.StdCall, EntryPoint = "Syn_USBHIDM1AuthenKey")]public static extern int Syn_USBHIDM1AuthenKey(int iPort, byte KeyType, byte BlockNo, byte[] pKey);/// <summary>/// 读M1卡/// </summary>/// <param name="iPort">[in]整形，读卡器的端口号，可以使用Syn_FindReader获得</param>/// <param name="BlockNo">[in]无符号字节，M1卡块号</param>/// <param name="pBlock">[out]无符号字节数组，16字节，读取的数据</param>/// <returns>0成功，其他失败</returns>[DllImport("SynIDCardAPI.dll", CharSet = CharSet.Unicode, CallingConvention = CallingConvention.StdCall, EntryPoint = "Syn_USBHIDM1ReadBlock")]public static extern int Syn_USBHIDM1ReadBlock(int iPort, byte BlockNo, byte[] pBlock);/// <summary>/// 写M1卡/// </summary>/// <param name="iPort">[in]整形，读卡器的端口号，可以使用Syn_FindReader获得</param>/// <param name="BlockNo">[in]无符号字节，M1卡块号</param>/// <param name="pBlock">[in]无符号字节数组，16字节，读取的数据</param>/// <returns>0成功</returns>[DllImport("SynIDCardAPI.dll", CharSet = CharSet.Unicode, CallingConvention = CallingConvention.StdCall, EntryPoint = "Syn_USBHIDM1WriteBlock")]public static extern int Syn_USBHIDM1WriteBlock(int iPort, byte BlockNo, byte[] pBlock);/// <summary>/// 挂起M1卡/// </summary>/// <param name="iPort">[in]整形，读卡器的端口号，可以使用Syn_FindReader获得</param>/// <returns>0成功</returns>[DllImport("SynIDCardAPI.dll", CharSet = CharSet.Unicode, CallingConvention = CallingConvention.StdCall, EntryPoint = "Syn_USBHIDM1Halt")]public static extern int Syn_USBHIDM1Halt(int iPort);[DllImport("SynIDCardAPI.dll", CharSet = CharSet.Unicode, CallingConvention = CallingConvention.StdCall, EntryPoint = "Syn_USBHIDReadFactoryInfo")]public static extern int Syn_USBHIDReadFactoryInfo(int iPort, ref byte pFactory, ref byte pVol, ref byte pSerialNo, ref byte pReserved);[DllImport("SynIDCardAPI.dll", CharSet = CharSet.Unicode, CallingConvention = CallingConvention.StdCall, EntryPoint = "Syn_USBHIDWriteFactoryInfo")]public static extern int Syn_USBHIDWriteFactoryInfo(int iPort, ref byte pFactory, ref byte pVol, ref byte pSerialNo, ref byte pReserved);[DllImport("SynIDCardAPI.dll", CharSet = CharSet.Unicode, CallingConvention = CallingConvention.StdCall, EntryPoint = "Syn_USBHIDReadUserInfo")]public static extern int Syn_USBHIDReadUserInfo(int iPort, ref byte pInfo);[DllImport("SynIDCardAPI.dll", CharSet = CharSet.Unicode, CallingConvention = CallingConvention.StdCall, EntryPoint = "Syn_USBHIDWriteUserInfo")]public static extern int Syn_USBHIDWriteUserInfo(int iPort, ref byte pInfo);/// <summary>/// 获得读卡器支持的最大通讯字节数和版本/// </summary>/// <param name="iPort">[in]整形，读卡器的端口号，可以使用Syn_FindReader获得</param>/// <param name="pSAMMaxByte">[out]无符号字节，读卡器支持的最大通讯字节数</param>/// <param name="pARMVol">[out]无符号字节数组，版本号</param>/// <returns></returns>[DllImport("SynIDCardAPI.dll", CharSet = CharSet.Unicode, CallingConvention = CallingConvention.StdCall, EntryPoint = "Syn_USBHIDGetMaxByte")]public static extern int Syn_USBHIDGetMaxByte(int iPort, ref byte pSAMMaxByte, ref byte pARMVol);[DllImport("SynIDCardAPI.dll", CharSet = CharSet.Unicode, CallingConvention = CallingConvention.StdCall, EntryPoint = "Syn_USBHIDSendSound")]public static extern int Syn_USBHIDSendSound(int iPort,  byte ucSound);[DllImport("SynIDCardAPI.dll", CharSet = CharSet.Unicode, CallingConvention = CallingConvention.StdCall, EntryPoint = "Syn_USBHIDControlLED")]public static extern int Syn_USBHIDControlLED(int iPort, byte ucLed);/// <summary>/// 控制蜂鸣器命令（仅A16D-HF）/// </summary>/// <param name="iPort">[in]整形，读卡器的端口号，可以使用Syn_FindReader获得</param>/// <param name="ucType">[in]无符号整形，命令,暂定为0X04</param>/// <param name="usTime"> [in]整形，蜂鸣器响时间，毫秒计算</param>/// <returns>0成功</returns>[DllImport("SynIDCardAPI.dll", CharSet = CharSet.Unicode, CallingConvention = CallingConvention.StdCall, EntryPoint = "Syn_USBHIDControlBeep")]public static extern int Syn_USBHIDControlBeep(int iPort, byte ucType, int usTime);/// <summary>/// 读取二代证ID号（仅A16D-HF）/// </summary>/// <param name="iPort"> [in]整形，读卡器的端口号，可以使用Syn_FindReader获得</param>/// <param name="pdwCardSN"> [out] 无符号字节数组，长度8字节</param>/// <returns>0成功，128失败</returns>[DllImport("SynIDCardAPI.dll", CharSet = CharSet.Unicode, CallingConvention = CallingConvention.StdCall, EntryPoint = "Syn_USBHIDGetSecCardID")]public static extern int Syn_USBHIDGetSecCardID(int iPort, byte[] pdwCardSN);[DllImport("SynIDCardAPI.dll", CharSet = CharSet.Unicode, CallingConvention = CallingConvention.StdCall, EntryPoint = "Syn_USBHIDSIMpowerOn")]public static extern int Syn_USBHIDSIMpowerOn(int iPort, ref byte ucATR,ref byte ucLen);[DllImport("SynIDCardAPI.dll", CharSet = CharSet.Unicode, CallingConvention = CallingConvention.StdCall, EntryPoint = "Syn_USBHIDSIMpowerOff")]public static extern int Syn_USBHIDSIMpowerOff(int iPort);[DllImport("SynIDCardAPI.dll", CharSet = CharSet.Unicode, CallingConvention = CallingConvention.StdCall, EntryPoint = "Syn_USBHIDSIMAPDU")]public static extern int Syn_USBHIDSIMAPDU(int iPort, int slen, ref byte datasend, ref int rlen, ref byte datareceive);[DllImport("SynIDCardAPI.dll", CharSet = CharSet.Unicode, CallingConvention = CallingConvention.StdCall, EntryPoint = "Syn_USBHIDSetUserIDCode")]public static extern int Syn_USBHIDSetUserIDCode(int iPort, ref byte code, int len);[DllImport("SynIDCardAPI.dll", CharSet = CharSet.Unicode, CallingConvention = CallingConvention.StdCall, EntryPoint = "Syn_USBHIDSetUserIDCode")]public static extern int Syn_USBHIDWriteUserMac(int iPort, ref byte pMac);[DllImport("SynIDCardAPI.dll", CharSet = CharSet.Unicode, CallingConvention = CallingConvention.StdCall, EntryPoint = "Syn_USBHIDIsEncryptMode")]public static extern int Syn_USBHIDIsEncryptMode(int iPort);[DllImport("SynIDCardAPI.dll", CharSet = CharSet.Unicode, CallingConvention = CallingConvention.StdCall, EntryPoint = "Syn_USBHIDIsEncryptMode")]public static extern int Syn_USBHIDdoUpdate(int iPort, ref byte updateBuffer, int bufferLen, int progressCallback);////				串口操作M1卡函数////[DllImport("SynIDCardAPI.dll", CharSet = CharSet.Unicode, CallingConvention = CallingConvention.StdCall, EntryPoint = "Syn_SerialFindReader")]public static extern int Syn_SerialFindReader(int iPort, ref int badurate);/// <summary>/// 打开串口/// </summary>/// <param name="iPort">串口号（1-16）</param>/// <param name="badurate">波特率（可使用Syn_GetCOMBaud获得）</param>/// <returns>0成功，其他失败</returns>[DllImport("SynIDCardAPI.dll", CharSet = CharSet.Unicode, CallingConvention = CallingConvention.StdCall, EntryPoint = "Syn_SerialOpen")]public static extern int Syn_SerialOpen(int iPort, int badurate);/// <summary>/// 关闭串口/// </summary>/// <param name="iPort">串口号（1-16）</param>/// <returns></returns>[DllImport("SynIDCardAPI.dll", CharSet = CharSet.Unicode, CallingConvention = CallingConvention.StdCall, EntryPoint = "Syn_SerialClose")]public static extern int Syn_SerialClose(int iPort);/// <summary>/// 复位M1卡片，返回M1卡片的卡号和卡类型/// </summary>/// <param name="iPort">[in]整形，读卡器的端口号，可以使用Syn_FindReader获得</param>/// <param name="pdwCardSN">[out]无符号四字节，返回M1卡片卡号</param>/// <param name="pbSize">[out] 无符号字节数组，返回M1卡卡类型</param>/// <returns>0成功，其他失败</returns>[DllImport("SynIDCardAPI.dll", CharSet = CharSet.Unicode, CallingConvention = CallingConvention.StdCall, EntryPoint = "Syn_SerialM1Reset")]public static extern int Syn_SerialM1Reset(int iPort, ref UInt32 pdwCardSN, ref byte pbSize);/// <summary>/// 用密钥验证M1卡/// </summary>/// <param name="iPort">[in]整形，读卡器的串口号（1-16），可以使用Syn_FindReader获得</param>/// <param name="KeyType">[in]无符号字节，验证类型，0—密钥A验证 1—密钥B验证</param>/// <param name="BlockNo">[in]无符号字节，M1卡块号</param>/// <param name="pKey">[in]无符号字节数组，6字节，密钥数组</param>/// <returns>0成功，128失败</returns>[DllImport("SynIDCardAPI.dll", CharSet = CharSet.Unicode, CallingConvention = CallingConvention.StdCall, EntryPoint = "Syn_SerialM1AuthenKey")]public static extern int Syn_SerialM1AuthenKey(int iPort,byte KeyType, byte BlockNo, byte[] pKey);/// <summary>/// 读M1卡/// </summary>/// <param name="iPort">[in]整形，读卡器的端口号，可以使用Syn_FindReader获得</param>/// <param name="BlockNo">[in]无符号字节，M1卡块号</param>/// <param name="pBlock">[out]无符号字节数组，16字节，读取的数据</param>/// <returns>0成功，其他失败</returns>[DllImport("SynIDCardAPI.dll", CharSet = CharSet.Unicode, CallingConvention = CallingConvention.StdCall, EntryPoint = "Syn_SerialM1ReadBlock")]public static extern int Syn_SerialM1ReadBlock(int iPort, byte BlockNo, byte[] pBlock);/// <summary>/// 写M1卡/// </summary>/// <param name="iPort">[in]整形，读卡器的端口号，可以使用Syn_FindReader获得</param>/// <param name="BlockNo">[in]无符号字节，M1卡块号</param>/// <param name="pBlock">[in]无符号字节数组，16字节，读取的数据</param>/// <returns>0成功</returns>[DllImport("SynIDCardAPI.dll", CharSet = CharSet.Unicode, CallingConvention = CallingConvention.StdCall, EntryPoint = "Syn_SerialM1WriteBlock")]public static extern int Syn_SerialM1WriteBlock(int iPort, byte BlockNo, byte[] pBlock);/// <summary>/// 挂起M1卡/// </summary>/// <param name="iPort">[in]整形，读卡器的端口号，可以使用Syn_FindReader获得</param>/// <returns>0成功</returns>[DllImport("SynIDCardAPI.dll", CharSet = CharSet.Unicode, CallingConvention = CallingConvention.StdCall, EntryPoint = "Syn_SerialM1Halt")]public static extern int Syn_SerialM1Halt(int iPort);[DllImport("SynIDCardAPI.dll", CharSet = CharSet.Unicode, CallingConvention = CallingConvention.StdCall, EntryPoint = "Syn_StartFindCPUCard")]public static extern int Syn_StartFindCPUCard(int iPort, byte[] ATS, ref int rlen);[DllImport("SynIDCardAPI.dll", CharSet = CharSet.Unicode, CallingConvention = CallingConvention.StdCall, EntryPoint = "Syn_StartRemoveCPUCard")]public static extern int Syn_StartRemoveCPUCard(int iPort, byte[] ATS);[DllImport("SynIDCardAPI.dll", CharSet = CharSet.Unicode, CallingConvention = CallingConvention.StdCall, EntryPoint = "Syn_PCTOCPUCard")]public static extern int Syn_PCTOCPUCard(int iPort, int slen, byte[] datasend, ref int rlen, byte[] datareceive);/// <summary>/// 寻找USB读卡器/// </summary>/// <returns></returns>public static int findUSBDriverDevice(){int nRet;for (int i = 1001; i < 1017; i++){nRet = ReadCardAPI.Syn_OpenPort(i);if (nRet == 0){nRet = ReadCardAPI.Syn_GetSAMStatus(i, 0);if (nRet == 0){ReadCardAPI.Syn_ClosePort(i);return i;}ReadCardAPI.Syn_ClosePort(i);}}return 0;}/// <summary>/// 寻找USBHID读卡器/// </summary>/// <returns></returns>public static int findUSBHIDDevice(){int nRet;nRet = Syn_OpenPort(9999);if (nRet == 0){Syn_ClosePort(9999);return 9999;}return 0;}/// <summary>/// 寻找串口读卡器/// </summary>/// <returns></returns>public static int findSerialDevice(){int nRet = 0;int m_iBaud = 0;for (int k = 1; k < 50; k++){nRet = Syn_SerialFindReader(k, ref m_iBaud);if (nRet == 0){return k;}}for (int j = 1; j < 17; j++){nRet = Syn_GetCOMBaud(j, ref m_iBaud);if (nRet == 0){nRet = Syn_SetCOMBaud(j, m_iBaud, m_iBaud);if (nRet == 0){Syn_ClosePort(j);return j;}Syn_ClosePort(j);}}return 0;}}#region 结构体//[StructLayout(LayoutKind.Sequential)][StructLayout(LayoutKind.Sequential, CharSet = CharSet.Ansi, Pack = 1)]public struct IDCardData{[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 32)]   //ByValTStr           ByValArray     CertVolpublic string Name;      //姓名   [MarshalAs(UnmanagedType.ByValTStr, SizeConst = 6)]public string Sex;       //性别[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 64)]public string Nation;    //民族[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 18)]public string Born;      //出生日期[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 72)]public string Address;   //住址[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 38)]public string IDCardNo;  //身份证号[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 32)]public string GrantDept; //发证机关[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 18)]public string UserLifeBegin; // 有效开始日期[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 18)]public string UserLifeEnd;   // 有效截止日期[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 20)]public string PassID;        //通行证号码[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 6)]public string IssuesTimes;   //签发次数[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 12)]public string reserved;      // 保留[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 255)]public string PhotoFileName;// 照片路径   [MarshalAs(UnmanagedType.ByValTStr, SizeConst = 4)]public string CardType;// 证件类型     [MarshalAs(UnmanagedType.ByValTStr, SizeConst = 122)]public string EngName;// 英文名      [MarshalAs(UnmanagedType.ByValTStr, SizeConst = 6)]public string CertVol;// 证件版本号                }#endregion}

本文来自互联网用户投稿，该文观点仅代表作者本人，不代表本站立场。本站仅提供信息存储空间服务，不拥有所有权，不承担相关法律责任。如若转载，请注明出处：http://www.mzph.cn/news/151540.shtml

如若内容造成侵权/违法违规/事实不符，请联系多彩编程网进行投诉反馈email:809451989@qq.com，一经查实，立即删除！

相关文章

1334. 阈值距离内邻居最少的城市/Floyd 【leetcode】

1334. 阈值距离内邻居最少的城市/Floyd 【leetcode】

1334. 阈值距离内邻居最少的城市 有 n 个城市&#xff0c;按从 0 到 n-1 编号。给你一个边数组 edges&#xff0c;其中 edges[i] [fromi, toi, weighti] 代表 fromi 和 toi 两个城市之间的双向加权边&#xff0c;距离阈值是一个整数 distanceThreshold。 返回能通过某些路径…
阅读更多...
Ubuntu18.04安装ROS系统+turtle测试

Ubuntu18.04安装ROS系统+turtle测试

安装 1.设置安装源 sudo sh -c echo "deb http://packages.ros.org/ros/ubuntu $(lsb_release -sc) main" > /etc/apt/sources.list.d/ros-latest.list sudo sh -c . /etc/lsb-release && echo "deb http://mirrors.tuna.tsinghua.edu.cn/ros/ubun…
阅读更多...
重生之我是一名程序员 36

重生之我是一名程序员 36

哈喽啊大家晚上好&#xff01;今天给大家带来的知识还是很简单的&#xff0c;是一个来自于C语言中的操作符——sizeof。 首先&#xff0c;我先带大家认识一下此操作符。sizeof是一个操作符&#xff0c;用于计算数据类型或变量所占用的内存字节数。它的使用方法为sizeof(type)或…
阅读更多...
linux网络编程之TCP协议编程

linux网络编程之TCP协议编程

Linux网络编程之TCP协议编程 tcp协议编程模型socket函数sockaddr_inbindlistenconnect 应用服务端代码客服端代码 TCP协议编程) tcp协议编程模型 Server 1.创建socket (socket函数) 2.确定服务器协议地址簇 (struct sockaddr) 3.绑定 (bind) 4.监听 ( listen) 5.接受客户端连接…
阅读更多...
【并发编程】Synchronized的使用

【并发编程】Synchronized的使用

&#x1f4eb;作者简介&#xff1a;小明java问道之路&#xff0c;2022年度博客之星全国TOP3&#xff0c;专注于后端、中间件、计算机底层、架构设计演进与稳定性建设优化&#xff0c;文章内容兼具广度、深度、大厂技术方案&#xff0c;对待技术喜欢推理加验证&#xff0c;就职于…
阅读更多...
C进阶---文件操作

C进阶---文件操作

我们在日常使用电脑保存文件时&#xff0c;其目的就是为了便于以后查看、修改、更新等操作&#xff1b;保存在文件中可以使数据持久化&#xff0c;所以今天我们家里学习文件的相关操作。 一、文件 1.1什么是文件 磁盘上的文件是文件。 在程序设计中&#xff0c;文件一般分…
阅读更多...
验证码案例 —— Kaptcha 插件介绍 后端生成验证码，前端展示并进行session验证（带完整前后端源码）

验证码案例 —— Kaptcha 插件介绍 后端生成验证码，前端展示并进行session验证（带完整前后端源码）

&#x1f9f8;欢迎来到dream_ready的博客&#xff0c;&#x1f4dc;相信你对这篇博客也感兴趣o (ˉ▽ˉ&#xff1b;) &#x1f4dc;表白墙/留言墙 —— 中级SpringBoot项目&#xff0c;MyBatis技术栈MySQL数据库开发&#xff0c;练手项目前后端开发(带完整源码) 全方位全步骤手…
阅读更多...
了解一下知识付费系统的开发流程和关键技术点

了解一下知识付费系统的开发流程和关键技术点

知识付费系统的开发既涉及到前端用户体验&#xff0c;又需要强大的后端支持和复杂的付费逻辑。在这篇文章中&#xff0c;我们将深入探讨知识付费系统的开发流程和关键技术点&#xff0c;并提供一些相关的技术代码示例。 1. 需求分析和规划&#xff1a; 在着手开发知识付费系…
阅读更多...
5大数据结构

5大数据结构

文章目录 1. 栈结构例题1&#xff1a;字符串括号匹配例题2&#xff1a;最小栈例题3&#xff1a;逆波兰表达式求值例题4&#xff1a;下一个更大元素 2. 队列结构题目1: 实现一个队列&#xff0c;包括入队和出队操作&#xff0c;并判断队列是否为空。题目2: 判断给定的字符串是否…
阅读更多...
MyBatis 事务源码分析

MyBatis 事务源码分析

先来看看在JAVA事务的相关技术&#xff0c;在JAVA中有两类事务&#xff0c;JDBC事务和JTA事务&#xff0c;如果是JDBC类型的事务&#xff0c;则是由Connection类来控制的。如果创建一个Connection对象时&#xff0c;没有显示调用 setTransactionIsolation(int level) 方法&…
阅读更多...
Spring Cloud Stream实践

Spring Cloud Stream实践

概述 不同中间件&#xff0c;有各自的使用方法&#xff0c;代码也不一样。 可以使用Spring Cloud Stream解耦&#xff0c;切换中间件时&#xff0c;不需要修改代码。实现方式为使用绑定层&#xff0c;绑定层对生产者和消费者提供统一的编码方式&#xff0c;需要连接不同的中间…
阅读更多...
8、创建第一个鸿蒙页面并实现页面跳转

8、创建第一个鸿蒙页面并实现页面跳转

一、创建页面 1、新建页面 在项目的"pages"目录上右键&#xff0c;选择”新建“——”page" 2、录入页面的名称 在“Page name”中输入页面的名称&#xff0c;并点击“Finish”完成创建 3、以下为创建的新页面 2、注册页面 新建的页面会自动在“resources”…
阅读更多...
一起Talk Android吧（第五百五十五回：Retrofit中的注解）

一起Talk Android吧（第五百五十五回：Retrofit中的注解）

文章目录 1. 概念介绍2. 注解的分类与功能2.1 方法类注解2.2 参数类注解3. 内容总结各位看官们大家好，上一回中分享了一个Retrofit使用错误的案例,本章回中将 介绍Retrofit请求中的注解。闲话休提，言归正转，让我们一起Talk Android吧！ 1. 概念介绍 我们在前面章回中介绍R…
阅读更多...
二十、虚拟机网络配置

二十、虚拟机网络配置

1、Linux网络配置原理 我自己Linux虚拟机的IP地址是&#xff1a;192.168.159.131 vmnet8&#xff1a;192.168.159.1 无线网卡&#xff1a;192.168.159.1 2、查看网络IP和网关 查看虚拟网络编辑器和修改IP地址 如果把这个位置的子网IP换成&#xff1a;192.168.8.0的话重启虚拟机…
阅读更多...
MySQL进阶_9.事务基础知识

MySQL进阶_9.事务基础知识

文章目录 第一节、数据库事务概述1.1、基本概念1.2、事务的ACID特性 第二节、如何使用事务 第一节、数据库事务概述 1.1、基本概念 事务 一组逻辑操作单元&#xff0c;使数据从一种状态变换到另一种状态。事务处理的原则 保证所有事务都作为 一个工作单元 来执行&#xff0c;…
阅读更多...
【2023云栖】陈守元：阿里云开源大数据产品年度发布

【2023云栖】陈守元：阿里云开源大数据产品年度发布

本文根据 2023 云栖大会演讲实录整理而成&#xff0c;演讲信息如下&#xff1a; 演讲人&#xff1a;陈守元 | 阿里云计算平台事业部开源大数据产品总监 演讲主题&#xff1a;阿里云开源大数据产品年度发布 随着云计算的不断发展&#xff0c;未来数据处理和应用的趋势将围绕C…
阅读更多...
CISP全真模拟测试题（一）

CISP全真模拟测试题（一）

免责声明 文章仅做经验分享用途，切勿当真，未授权的攻击属于非法行为！利用本文章所提供的信息而造成的任何直接或者间接的后果及损失，均由使用者本人负责，作者不为此承担任何责任，一旦造成后果请自行承担！！！ 1、信息安全发展各阶段中，下面哪一项是通信安全阶段主要面…
阅读更多...
python rb读取文件 base64加密 byte.decode解密，base64解密

python rb读取文件 base64加密 byte.decode解密，base64解密

Base64是一种二进制到文本的编码方式 import base64with open("D:\头像.jpg","rb") as fileobj:datafileobj.read()print("原数据格式")print(data)encode_database64.b64encode(data)print("Base64加密后的格式")print(encode_data)…
阅读更多...
ES6中实现继承

ES6中实现继承

本篇文章主要说明在ES6中如何实现继承&#xff0c;学过java的小伙伴&#xff0c;对class这个关键字应该不陌生&#xff0c;ES6中也提供了class这个关键字作为实现类的语法糖&#xff0c;咱们一起实现下ES6中的继承。 实现思路 首先直接通过class来声明一个Teacther类&#xff…
阅读更多...
Ubuntu 16安装Python 3.10

Ubuntu 16安装Python 3.10

操作系统为Ubuntu 16.04&#xff0c;默认的Python版本有2.7和3.5。由于不满足要求&#xff0c;需要更高版本的python。这里使用了Python3.10。其他操作系统或不同版本&#xff0c;请参考使用 先安装 OpenSSL 1.1.1 系统默认的是1.0.2.g&#xff0c;不满足要求&#xff08;可以…
阅读更多...
最新文章

Copyright @ 2022~2023