文章目录
- 6.1 高可用方案
- 6.2 安装配置 HAProxy
- 1、 安装 HAProxy
- 2、 启动验证
- 6.3 配置 Keepalived
- 1、 安装 Keepalived
- 2、 启动验证
- 6.4 测试高可用
- 1、 测试步骤
在实际项目中，Mycat 服务也需要考虑高可用性，如果 Mycat 所在服务器出现宕机，或 Mycat 服务故障，需要有备机提供服务，需要考虑 Mycat 集群
6.1 高可用方案
我们可以使用 HAProxy + Keepalived 配合两台 Mycat 搭起 Mycat 集群，实现高可用性。HAProxy实现了 MyCat 多节点的集群高可用和负载均衡，而 HAProxy 自身的高可用则可以通过 Keepalived 来实现
6.2 安装配置 HAProxy
1、 安装 HAProxy
#1准备好HAProxy安装包，传到/opt目录下 #2解压到/usr/local/src tar-zxvf haproxy-1.5.18.tar.gz-C/usr/local/src #3进入解压后的目录，查看内核版本，进行编译 cd/usr/local/src/haproxy-1.5.18uname-r make TARGET=linux310 PREFIX=/usr/local/haproxy ARCH=x86_64 # ARGET=linux310，内核版本，使用uname-r查看内核，如：3.10.0-514.el7，此时该参数就为linux310； #ARCH=x86_64，系统位数； #PREFIX=/usr/local/haprpxy #/usr/local/haprpxy，为haprpxy安装路径。 #4编译完成后，进行安装 make install PREFIX=/usr/local/haproxy #5安装完成后，创建目录、创建HAProxy配置文件 mkdir-p/usr/data/haproxy/vim/usr/local/haproxy/haproxy.conf #6向配置文件中插入以下配置信息,并保存 global log127.0.0.1local0 #log127.0.0.1local1 notice #log loghost local0 info maxconn4096chroot/usr/local/haproxy pidfile/usr/data/haproxy/haproxy.pid uid99gid99daemon #debug #quiet defaults log global mode tcp option abortonclose option redispatch retries3maxconn2000timeout connect5000timeout client50000timeout server50000listen proxy_status bind:48066mode tcp balance roundrobin server mycat_1192.168.140.128:8066check inter10s server mycat_2192.168.140.127:8066check inter10s frontend admin_stats bind:7777mode http stats enable option httplog maxconn10stats refresh30sstats uri/admin stats auth admin:123123stats hide-version stats adminifTRUE2、 启动验证
#1启动HAProxy/usr/local/haproxy/sbin/haproxy-f/usr/local/haproxy/haproxy.conf #2查看HAProxy进程 ps-ef|grep haproxy #3打开浏览器访问 http://192.168.140.125:7777/admin #在弹出框输入用户名：admin密码：123123#如果Mycat主备机均已启动，则可以看到如下图#4验证负载均衡，通过HAProxy访问Mycatmysql-umycat-p123456-h192.168.140.126-P480666.3 配置 Keepalived
1、 安装 Keepalived
#1准备好Keepalived安装包，传到/opt目录下 #2解压到/usr/local/src tar-zxvf keepalived-1.4.2.tar.gz-C/usr/local/src #3安装依赖插件 yum install-y gcc openssl-devel popt-devel #3进入解压后的目录，进行配置，进行编译 cd/usr/local/src/keepalived-1.4.2./configure--prefix=/usr/local/keepalived #4进行编译，完成后进行安装 make&&make install #5运行前配置 cp/usr/local/src/keepalived-1.4.2/keepalived/etc/init.d/keepalived/etc/init.d/mkdir/etc/keepalived cp/usr/local/keepalived/etc/keepalived/keepalived.conf/etc/keepalived/cp/usr/local/src/keepalived-1.4.2/keepalived/etc/sysconfig/keepalived/etc/sysconfig/cp/usr/local/keepalived/sbin/keepalived/usr/sbin/#6修改配置文件 vim/etc/keepalived/keepalived.conf#修改内容如下!ConfigurationFileforkeepalived global_defs{notification_email{xlcocoon@foxmail.com}notification_email_from keepalived@showjoy.comsmtp_server127.0.0.1smtp_connect_timeout30router_id LVS_DEVEL vrrp_skip_check_adv_addr vrrp_garp_interval0vrrp_gna_interval0}vrrp_instance VI_1{#主机配MASTER，备机配BACKUP state MASTER #所在机器网卡interfaceens33 virtual_router_id51#数值越大优先级越高 priority100advert_int1authentication{auth_type PASS auth_pass1111}virtual_ipaddress{#虚拟IP192.168.140.200}}virtual_server192.168.140.20048066{delay_loop6lb_algo rr lb_kind NAT persistence_timeout50protocol TCP real_server192.168.140.12548066{weight1TCP_CHECK{connect_timeout3retry3delay_before_retry3}}real_server192.168.140.12648600{weight1TCP_CHECK{connect_timeout3nb_get_retry3delay_before_retry3}}}2、 启动验证
#1启动Keepalivedservice keepalived start #2登录验证 mysql-umycat-p123456-h192.168.140.200-P480666.4 测试高可用
1、 测试步骤
#1关闭mycat #2通过虚拟ip查询数据 mysql-umycat-p123456-h192.168.140.200-P48066如果文章对你有一点点帮助，欢迎【点赞、留言、+ 关注】
您的关注是我创作的动力！若有疑问/交流/需求，欢迎留言/私聊！
多一个朋友多一条路！
